Here's how to use the SewerSolution on your RVSTEP
1, PUMP OUT WASTE. Connect the hoses, start the water running and open the gate
valve. Sewage passes thru the RV sewer pipe and gate valve into the SewerSolution.
The patented Jet Pump will shred and eject waste thru the Discharge Pipe. STEP
2, FLUSH RV WASTE SYSTEM. When sewage is dumped switch to the Flush Jet to shoot
water back up the RV Sewer Pipe, flushing the tank with clean water. When the
sewer tank fills with adequate flush water, repeat Step 1 and dump the flush water.
This cycle of 'in with the good water and out with the bad' may be repeated as
desired to remove waste. All you have to do is flip the Selector Handle a few
times. (Note that depending on the configuration of your RV’s sewage pipes,
the SewerSolution may not flush water back into your black water tank.) STEP
3, CLEAN SewerSolution. When the RV waste system is clean, close the RV gate valve
and rinse everything downstream of the gate valve with clean water. The RV sewer
pipe, SewerSolution pump and the 3/4" Plastic Dump Hose are completely cleaned!
You will finish the job clean and begin clean the next time! It’s
that easy, no more smelly dirty 3” hoses. |