Basic product The
SewerSolution System includes SewerSolution pump unit, a 10' length of Dump Hose
and the Full Hookup Adapter Kit. Everything you need to get started! Additional
10' Hose Kits are available to extend the range of your SewerSolution.
The
SewerSolution Jet Pump is molded from high strength clear Lexan polycarbonate
plastic. The jet nozzle swivels to switch from the Dump to Flush mode. The
SewerSolution needs a good hose to operate properly. Our reinforced vinyl hose
will hold the important inside diameter necessary for good pump operation. This
tough stuff is likely the last RV sewage hose you will ever buy! To insure a good
fit to the SewerSolution and the Adapter Kit on the other end we perform both
ends of the hose for easy installation. Included with each Hose Kit is a short
piece of tubing that allows you to splice the hose to another piece of similar
hose. Our
hose is not only clean and high quality, it's a bargain compared to the old 'stinky
slinky' 3" hose. A 10' section of the 3" hose must be stretched out
to get the full length. Our hose gives the full 10' with no hassle. Our hose will
last much longer than the 3" hose.
Use a maximum of 30' of the 3/4"
hose. If you need to pump longer distances (up to 100' over level ground) you
can insert 1" PVC pipe (white pipe from the hardware store) into the system.
This much cheaper and will pump out faster. |